Solar Energy System Profiles.
ARFEN Mounting Systems can be easily used in many architectural applications and ground applications for both individual and corporate use. Load capacities according to TS 498 standard content are preferred in systems design. All components are manufactured in EXC1 class according to the EN 15088 directives and according to EN 1090 norms.
Field mounting system: Aluminum consists of beams, clamps, and knuckle elements. Single steel pie and double-pile systems with 10-45 angle compatibility. It can be used with steel systems due to the fact that the beam system is in a universal structure.
Field mounting systems can be applied on the anchoring of concrete and fixing on the screwed floor.
The knuckle elements are connected to the still ram by a key-head screw. The customer can use all-in-one systems depending on his/her preference. The important detail for joint application is the deed for a locknut.
Bean element can be used as a steel profile. The steel material will lead to an increase in operation time and field transportation cost. Aluminum-Aluminum material pair will be an advantage in grounding and transferring the thermal load.
In beam and PV panel connection; Click Mounting systems are applied. In this respect, workmanship inland conditions can be applied with lower costs and less technical equipment.
Field mounting system can also be used with seasonal adjustment. If the conditions of the land are suitable the angle of the tripod can be adjusted to the season value in order to obtain high efficiency by changing the angle with the season transitions in order to obtain high efficiency. This application can be achieved with manual or mechanical support.
SOLAR ENERGY SYSTEM PROFILES
ARFEN Mounting systems offer a robust cost-effective implementation that easily adapts to roof architecture. Load-bearing aluminum alloy profiles are designed according to the sliding hinge system. In this case, there is no critical section in the mechanical system and no thermal deformation occurs.
Roof mounting system: Aluminum is composed of beams, clamps, and knuckle elements. It can be connected directly to the coating material in smooth and sloping gaps. According to the type of roofing element roofing is used in accordance with the existing connecting elements without drilling holes. In this case, the roof does not leak. At the same time=, it does not create a static load on the covering element.
Room mounting system: It can adapt to the slope of the room as well as necessary equipment for angle elevation requirements. Likewise, it offers direct mounting convenience on flat roofs.
The advantage of grounding and corrosion is achieved by mounting on the roof with a pair of aluminum-aluminum materials. Due to the direct mounting of the system to the roof construction, residual thermal stress does not occur.
