Waterslag and Copping Systems
Anodised or powder-coated finishing products compatible with various exterior cladding materials, terrace parapet application, and assembled through 2 mm or 3mm carrier pieces.
Extruded profiles. One lower carrier piece screwed on the parapet every 50 cm interval H-section profile or TPE joint seals are installed on the joints.
They are produced of 1,5 mm aluminum sheet. Carrier pieces are made of a 2,00 mm thick hard alloy plate. Production length is 3,00 mt.
Waterslag profiles are used to replace precast elements under windows. marbles, or granites. ARFEN's waterslag system is a composition of a light dropper with an aluminum bottom carrier and edge finish details. Waterslag profiles produced in our own facilities from 50mm to 250 mm can be produced by powder coated or anodized in any length.
BALCONY, TERRACE, AND PARAPET DRIP PROFILE
Dropper profiles can be applied with all kinds of finishing elements such as ceramic, granite, and etc., and application where open terraces and balconies do not require parapets in the application. In bituminous membrane applications, dropper profiles can be used as a final layer of the top layer slated membrane.
ALUMINUM INSULATION PRESSURE PROFILES.
Aluminum Insulation Pressure Profiles are compatible with all kinds of bitumen, PVC, TPO, TPE membrane applications at the end of the insulation details. Surface-mounted, recessed model, as well as wide flashing type, are available.